Abstract: Landslides are the worst natural occurrences, which, in most cases, result in huge losses in life and damages to infrastructure. To minimize such risks, it is essential that they are ...
Designed by Cirket open-source hardware in China, the ESP32-DIV V1 is a handheld wireless pentesting and experimentation tool ...
With two cores at 240 MHz and about 8.5 MB of non-banked RAM if you’re using the right ESP32-S3 version, this MCU seems at ...
Bluetooth is everywhere, but it’s hard to inspect. Most of the magic is done inside a Bluetooth controller chip, accessed ...
XDA Developers on MSN
I automated network monitoring my home with ESP32 boards
The ESP32-C6 board continuously reports signal strength values that can be referenced to the wireless situation in the ...
XDA Developers on MSN
The ESP32-powered Kode Dot gave me the same feeling the Flipper Zero did
To make one thing clear, the Kode Dot is not trying to be a Flipper clone but the vibe is familiar in the best way. From afar ...
WifiEspNow is an Arduino library for ESP-NOW, a connectionless WiFi communication protocol defined by Espressif. Refer to ESP-NOW reference for more information about how ESP-NOW works and its ...
实体键 要实现一个ESP32作为遥控器端（esp32_wroom_car_client.ino），需要连接4个按钮到ESP32的GPIO引脚，并且当按钮被按下时，发送HTTP POST请求到另一个作为服务器端的ESP32（esp32_wroom_car_server.ino）。 连接每个按钮的一个引脚到ESP32的GPIO引脚，另一个引脚连接到GND。
Some results have been hidden because they may be inaccessible to you
Show inaccessible results
Feedback